POWER FOAM

You can seal almost all porous hard surfaces, including but not limited to:

• Natural stone (limestone, sandstone, travertine, granite, marble)
  
• Pavers and concrete
  
• Porcelain and ceramic tile
  
• Grout, mortar joints, and render
  
• Honed or polished concrete
  
• Cement sheet cladding and stone veneers
  
• Terracotta and clay surfaces
  

Not sure if your surface qualifies?

Just send us a quick photo, we’re happy to confirm!

Our sealers are designed to last indefinitely.

You can optionally reapply after 3–5 years to maintain peak performance, but they’ll never flake, yellow, or peel unlike traditional sealants.

Most surfaces will absorb around 10m² or 108 sq ft per litre.

If you’re unsure, send us a photo or drop a message, we’re happy to help with surface type and quantity.

Prep:
Make sure your surface is clean, dry, and free from dust or residue.

Apply:

1. Use the product undiluted.
2. Apply two coats wet-on-wet — meaning the second coat goes on while the first is still damp, not dry.
3. Use a low-pressure sprayer or microfibre applicator.
   
   Avoid excess pooling or runoff.

When to Apply:
Ideal surface temperature: 10–30°C
Avoid application in rain or direct hot sun.